Epson projector lens

Epson EB-L1495U projection lens

Epson EB-L1495U projection lens
Throw ratio: 0.6:1
Throw ratio: 3.4-5.9:1
Support Epson projection model: EB-L1755U EB-L1750U EB-1505UH EB-1500UH EB-L1495U EB-L1490U
Support Epson projection model: EB-L1755U EB-L1750U EB-1505UH EB-1500UH EB-L1495U EB-L1490U

Specifications Projector:

Projection System:High-aperture Epson 3LCD, 3-chip technologyProjection Method:Front/rear/ceiling mountDriving Method:Poly-silicon TFT Active MatrixNative Resolution:WUXGA with 4K Enhancement1 (1920 x 1200 x 2)Resolution on Screen:WUXGA with 4K Enhancement1/ 4.6 million pixels1Pixel Number in Device:2,304,000 pixels (1920 x 1200) x 3 chipsSignal Input:Maximum display resolution: 4096 x 2160 (resizing display)
Display resolution: 1920 x 1200 pixelsColor Brightness - Color Light Output:9,000 lumens2White Brightness - White Light Output:9,000 lumens2Aspect Ratio:Supports 4:3, 16:9, 16:10Resize:640 x 480, 800 x 600, 1280 x 1024, 1400 x 1050Brightness Uniformity:90%Pixel Arrangement:Cross stripeSize - projected distance:50" – 300"Keystone Correction:Vertical: ±45 degrees; Horizontal: ±30 degreesContrast Ratio:2,500,000:1 AbsoluteBlack™ (Full White 8,000 lm/Full Black 0 lm)Color Reproduction:Up to 1 billion colorsLight Source Life:20,000 hours3Illumination Technology:Laser Phosphor

Effective Scanning Frequency Range:

Pixel Clock:13.5 MHz – 162 MHz (up to UXGA 60 Hz)Horizontal:15 kHz – 92 kHzVertical:50 Hz – 85 Hz


Operating Temperature:32 ° to 113 °F (0 ° to 45 °C)Weight:48.4 lbSecurity:Security cable hole, lens lock, Kensington lock provision

Projection Lens:

Type:(For ELPLM15) Powered shift/focus/zoomF-number:(For ELPLM15) 1.8 – 2.35Focal Length:(For ELPLM15) 36.0 mm – 57.4 mmZoom Ratio:(For ELPLM15) Optical zoom 1 – 1.6xThrow Ratio Range:(For ELPLM15) 1.57 – 2.56Lens Shift:Vertical: ±60%; Horizontal: ±18%

Projector Details:

Display Performance:NTSC: 480 line, PAL: 576 line (depends on observation of the multi-burst pattern)Input Signal:NTSC/NTSC4.43/PAL/M-PAL/N-AL/PAL60/ SECAM/480i/576i/480p/576p/720p/1080i/1080pInterfaces:
  • 3G-SDI x 1
  • DVI-D x 1
  • HDMI x 1
  • HDBaseT x 1
  • 5-BNC, VGA x 1
  • Audio in: Mini Stereo x 3
  • Variable audio out: Mini Stereo x 1
  • USB connector Type B x 1: For service only
  • USB connector Type A x 1: For wireless only
  • Monitor out: Mini D-sub 15 pin x 1
  • Serial: RS-232c x 1

Projector Dimensions:

Including feet:23.1" x 19.4" x 8.3"

Remote Control:

Features:Power, source search selection, lens shift, zoom, focus, test pattern selection, A/V Mute, freeze, user ID, auto, aspect, color mode, number, page up and down, E-zoom, volume, help, menu, enter, esc and pointer functionsOperating Distance:49 ftOperating Angle:Right/left: Front: ± 60 degrees; rear: ± 30 degrees
Upper/lower: Front: ± 20 degrees; rear: +10 to +50 degrees


Power Supply Voltage:100 – 240 V ±10%, 50/60 Hz ACPower Consumption:
  • 645 W (Normal Mode)
  • 524 W (Extended Mode)
  • 2.0 W Standby (Communication on)
  • 0.5 W Standby (Communication off)




   Projection ratio: distance from lens to picture divided by picture width


   9 brightness uniformity: 9 points average brightness divided by the highest brightness


   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro

LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
Do not touch the lens surface when removing or installing the lens.
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
Work on a level surface with a soft cloth under it toavoid scratching.
When using the lens unit, set the lens shift adjustment to the center of the screen.
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.





Welcome to LEDU lens
Welcome to the world's largest alternative lenses supplier. We focus on professional projector lenses with a throw ratio of 0.3-9:1. Welcome to leave your contact method and we will contact you as soon as possible.